Volvo Penta Venemoottori

KAMD44

Tuotannossa 1997–2004

The Volvo Penta KAMD44 is the shaft-inboard version of the 260 hp, 24-valve, compressor- and turbocharged 3.6-litre six, supplied with a Volvo Penta reverse gear instead of an Aquamatic drive.

KAMD44 is the same 260 hp, four-valve-per-cylinder, EDC-governed 3.6-litre six as the KAD44, but configured as a conventional shaft inboard with an HS-series reverse gear rather than a Duoprop sterndrive - Volvo Penta covers both in a single KAD/KAMD44P operator's manual. It was the most powerful of the classic pre-common-rail Volvo sixes available on shafts, sold from 1997 in P, P-A, P-B and P-C revisions until the D6 generation replaced it. In Nordic listings it appears under fast flybridge and hardtop cruisers of the early 2000s; the compressor, aftercooler and EDC system are the things that separate a cheap example from an expensive one.

Tekniset tiedot

Teho

Teho
260 hp
Teho (kW)
191 kW
Nimelliskierrosluku
3800 rpm

Moottori

Kokoonpano
inline-6
Sylinterit
6
Iskutilavuus
3.6 L
Ahtaus
turbo + supercharger + aftercooler
Polttoaine
Diesel
Asennus
Sisämoottori

Arvostelut

Riippumattomia arvosteluja ei ole vielä kirjattu.

Lähteet

  1. 1. Volvo Penta KAD/KAMD44P operator's manual, Technical Data - Engine — AB Volvo Penta (via ManualsLib)
  2. 2. Volvo Penta Aquamatic Duoprop KAD44P EDC/DP Professional - product leaflet (02-2003) — AB Volvo Penta

Tekniset tiedot koottu valmistajien lähteistä.