Anytec 622 SPD
The Anytec 622 SPD is a 6.8 m welded aluminium twin-console open motorboat. The 2023 owner's manual gives a maximum recommended engine of 200 hp, an unladen weight of 1135 kg without engine, and CE design category C for six persons. It carries 170 litres of fuel and reaches around 48 knots. It is the double-console derivative of the 622 SP, sharing the same 20/55-degree hull.
The 622 SPD pairs a compact hull with disproportionate power and load capacity. Construction is fully welded aluminium throughout with the M400 surface treatment, and recent boats ship with Anytec's own damped Shark-type helm seats, Simrad navigation electronics and Zipwake interceptor trim as standard.
Specifications have moved substantially across generations, and the figures here are the current ones. The 2012 manual rated the boat at 150 hp with 760 kg unladen; the 2023 manual rates it at 200 hp with 1135 kg unladen without engine. Draft also differs by measurement basis: 0.52 m minimum with the engine tilted against the 0.93 m maximum recorded here with the leg down at full load.
Anytec redesigned its whole range in 2017 and dropped this model, then restarted production in November 2020 as the 622 SPD Classic, with newer electronics on an unchanged hull. It remains in the current model programme.
Kokoonpanot
622 SPD Classic
Tekniset tiedot
Mitat
- Pituus
- 6.8 m
- Leveys
- 2.27 m
- Syväys
- 0.93 m
Kapasiteetit
- Paino
- 1135 kg
- Polttoainesäiliö
- 170 L
Teho
- Suurin teho
- 200 hp
- Voimansiirto
- Perämoottori
Rakenne
- Rungon materiaali
- Alumiini
Luokitus
- CE-suunnitteluluokka
- C
Arvostelut
Riippumattomia arvosteluja ei ole vielä kirjattu.
Lähteet
- 1. Anytec 622 SPD Owner's Manual (English, 2023) — Anytec Sweden AB
- 2. Anytec 622 SPD Owner's Manual (Swedish, 2012) — Anytec Sweden AB
- 3. Anytec 622 SPD - anytec.se — Anytec Sweden AB
Samankaltaiset veneet
Tekniset tiedot koottu valmistajien lähteistä.