Anytec 622 SP
The Anytec 622 SP is a 6.76 m fully welded aluminium open console boat, the single-console sister to the twin-console 622 SPD. It takes a single outboard rated to 200 hp and carries 170 litres of fuel, for a top speed of around 48 knots, and is CE category C certified for six people. Anytec markets it toward sport fishermen and professional users, citing the large open deck areas and substantial load capacity.
The 622 SP sits at the entry point of Anytec's current range. Its hull is welded from bow to stern with no rivets, in aluminium treated with the proprietary M400 nano surface coating, and carries the 20/55-degree variable deadrise shared with the 622 SPD.
The layout is deliberately spare: a single steering console, open deck fore and aft, welded swim platforms, flotation material in the hull and welded grab rails. There is no cabin, berth or toilet, which makes it a workboat-derived leisure craft rather than an overnighting boat.
Production paused after Anytec's 2017 range redesign and restarted in November 2020 under the Classic badge, with updated navigation electronics and optional damped A-series seats on an unchanged hull; dealers are taking orders for 2026 model year boats. Dry weight is left unrecorded here because sources disagree three ways, quoting 720, 760 and 824 kg, and draft is omitted for the same reason.
Kokoonpanot
622 SP Classic
Tekniset tiedot
Mitat
- Pituus
- 6.76 m
- Leveys
- 2.26 m
Kapasiteetit
- Polttoainesäiliö
- 170 L
Teho
- Suurin teho
- 200 hp
- Voimansiirto
- Perämoottori
Rakenne
- Rungon materiaali
- Alumiini
Luokitus
- CE-suunnitteluluokka
- C
Arvostelut
Riippumattomia arvosteluja ei ole vielä kirjattu.
Lähteet
- 1. Anytec 622 SP - anytec.se — Anytec Sweden AB
- 2. Anytec 622 SP - Skippo — Skippo
- 3. Anytec satsar pa sina gamla modeller - Skippo — Skippo
Samankaltaiset veneet
Tekniset tiedot koottu valmistajien lähteistä.