No photograph on file
Axopar Bowrider

Axopar 24 HT

In production 2016–2020 Designed by Jarkko Jamsen / Navia Design

The Axopar 24 HT is the hard-top member of Axopar's 24 range, a 7.6 m GRP outboard bowrider built from 2016 until about 2020 and now discontinued. It has a 2.55 m beam, a 1830 kg weight excluding engine, a 220-litre fuel tank, two berths and CE category C certification for eight people. Late-production boats are rated to 250 hp.

The 24 range - Open, T-Top and Hard Top - was launched at boot Dusseldorf in January 2016 and had disappeared from Axopar's line-up by mid-2021, replaced in the range by the 25. The HT is the heaviest of the three at 1830 kg against 1750 for the Open and 1790 for the T-Top; those are distinct per-variant figures and are not averaged here.

The maximum engine rating changed over the model's life, which matters for any specific boat: Axopar published 90-200 hp in April 2016, 115-200 hp in October 2017 and 150-250 hp by March 2019, and a 2016 CE builder's plate reads 148 kW (200 hp). The 250 hp figure loaded here is the late-production maximum.

Fuel is quoted as 220 litres on the spec card, 230 in the same page's equipment list and 233 in the owner's manual; the spec-card figure is used. Fresh water was an option (45 or 50 litres depending on source) and is omitted, as is a toilet, which came only as an optional package.

Configurations

  • Range siblings: 24 Open
  • 24 T-Top

Specifications

Dimensions

Length
7.6 m
Beam
2.55 m
Draft
0.7 m

Capacities

Weight
1830 kg
Fuel capacity
220 L
Berths
2

Power

Max power
250 hp
Propulsion
Outboard

Construction

Hull material
GRP (fibreglass)

Rating

CE design category
C

Reviews

No independent reviews on file yet.

Sources

  1. 1. Axopar 24 Hard Top spec card (archived 2019) — Axopar Boats
  2. 2. Axopar 24 test - Venemestari — Venemestari

Similar boats

Specifications compiled from manufacturer sources.